Viet Nam (VN)English (UK)
Bàn tạo áp thủy lực chuẩn LR-Cal LSP 1600-BM
zoom Xem ảnh lớn

Bàn tạo áp thủy lực chuẩn LR-Cal LSP 1600-BM (Mã: LSP 1600-BM)

Giá: Liên hệ
Nhà sản xuất: LR-CAL

Đặt hàng qua điện thoại

+(84) 4 6261 5111

+(84) 4 6261 4111

Phương thức thanh toán
Cách vận chuyển hàng
Chính sách đổi trả hàng

Test Pumps 

Spindle pump for calibration

Model LR- Cal LSP 1600-BM

  • Pressure Source for calibration, hydraulic, pressure up to +1600 bar
  • Operating fluid: Hydraulic fluids based on mineral oil
  • With built-in booster pump
  • And high pressures can be generated via the spindle pressures without much effort and fine-tune
  • Execution in a sturdy metal housing

Description LR- Cal LSP 1600-BM Druckvergleichsprüfpumpe


The Pressure Comparison Test Pumps LR- Cal LSP 1600-BM used to generate pressure for testing, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements of all kinds. These pressure tests may be in the laboratory or workshop, but also on site to take place at the measuring point.

If you connect the pressure gauge to be tested and a sufficiently accurate reference pressure gauge to the Druckvergleichsprüfpumpe LR- Cal LSP 1600-BM, so effective for actuating the pump to both measuring the same pressure. By comparing the two measured values ​​at any pressure values ​​can be a review of the accuracy or an adjustment of the instrument under test.

For the exact start of the measurement points, the Pressure Comparison Test Pumps (screw pumps) are LR- Cal LSP 1600-BM equipped with a fine to be operated spindle wheel. The devices are characterized by a current within the pump body rotating spindle, so that there is no adverse bending torque on a spindle and particularly for mobile applications also has the advantage that the size of the Test Pumps not changed during operation by turning the spindle. The Pressure Comparison Test Pumps LR- Cal LSP 1600-BM only needs a very small force.


Specification LR- Cal LSP 1600-BM Druckvergleichsprüfpumpe


Pressure range


0 .. 1600



Hydraulic fluids based on mineral oil

Pressure connections


2 x G 1/2 "internal thread, free running, with inserted sealing ring

Liquid reservoir



Piston diameter





about 3.9 (about 0.1 per revolution)



at 250 bar: 2.0, at 500 bar: 4.0, at 1000 bar: 8.0



Brass, stainless steel, aluminum, FKM, NBR

Distance between the pressure ports:





W 400 x D 375 x H 265 (without spindle cross)






Robust metal housing with adjustable feet

Article number




Accessories for LR- Cal LSP 1600-BM Druckvergleichsprüfpumpe


Product no.



Plug G 1/2 brass 
to closing both pressure ports 
2 pieces needed


Replacement O-ring seals for the pressure ports 
(4 x 2,2 and 5 pcs 5 pcs 8 x 2)


Thread Adapter Kit in Case for EUT 
G 1/4, G 3/8, 1/2 "NPT and M 20x1, 5 
including Wrench 32


90° angle adapter 1/2 "when Gauges 
should be checked radial pressure port on the back


Hydraulic fluid based on mineral oil, 1 liter bottle